8HP 3″ Gas Powered Water Pump For Online
The New WARTON 8HP 3 Inch High Flow Petrol Water Pump has landed and is already becoming the most demanded portable pump solution by Aussies and Kiwis alike! This water pump industrial series will provide outstanding performance for general water pumping applications. Whether it’s for heavy-duty cleaning, irrigating the garden, water pump 3 inches, or pumping out a flooded cellar, you’ll be amazed at the versatility and performance of the Warton 8HP Petrol Water Pump Gas.
This commercial series features an 80mm inlet/outlets, flowing an impressive 40000 Litres/hour (666L/min) with a total head of 60m. Coupled with a powerful Warton 235cc 4-stroke engine, transferring water up a slope or to a second, third, or fourth story now takes less setup time and half the fuss. A convenient-sized 4.5L fuel tank means it can run for 3 hours on a single fill (load dependent).
Genuine Warton Water Pump Advantage:
- Efficient and powerful, the gas submersible pump’s centrifugal pump and superior impeller design reduce pump discharge loss. The suction entry on both sides of the impeller provides axial balance to the impeller, offering full-range pump performance linear to engine throttle.
- Prolonged engine life – the low oil alert alarm will stop the engine when oil is insufficient to avoid damage to the engine.
- Low vibration, less noise—housed within a protective tubular steel easy-carry frame, these units feature 4x anti-vibration mount points.
Powered by the industry’s reliable 8HP Honda GX240 engine, it effortlessly pumps water up to 375 gallons per minute around your job site, farm, home and other remote locations!
Plus, with a 3″ x 3″ inlet and outlet, gas powered sump pump can easily handle solid waste up to 1.5″ in diameter!
With a lightweight and transportable design, this pump is perfect for on-the-go pumping dirty water in industrial and agricultural applications, such as flooded construction sites, basements, draining pools and ponds, or irrigating fields!
Features
- Moves liquids at a rate of 22,500 gallons/hour (375 GPM)
- Maximum elevation of 89 ft
- Handles solids up to 1.5″
- 3in water pump
- Silicone carbide mechanical seals 100x Stronger than standard ceramic seals
- 3 inch pump
- Chrome-plated volute is 12x harder than cast iron
- Gas operated water pump
- Vibration isolation mounts improve performance and pump stability
- 1-year factory warranty
Specifications:
Model: | WP30 |
Inlet & Outlet Size: | 3.14 inch |
Fuel Type: | Gasoline |
Head: 30M | 1.18 inch |
Suction: 8M | 0.31 inch |
Flux: | 60 m³/H |
Engine Type: | BS170F |
Power: | 8.0HP |
Speed: | 3600 RPM |
Reviews
There are no reviews yet.